BT200手操器

BT200-N00、BT200-P00

BT200 BRAIN手操器是一種便攜設備，與采用BRAIN通信協議的設備一起使用，對其進行設定、更改、顯示和打印參數（如工位號、輸出模式、范圍等）。這款手操器還可以監視I/O值和自診斷結果，設定恒定電流的輸出以及調零。當系統啟動或維持操作狀態時，只需連接設備的4~20mA DC信號線或ESC（信號調節通信卡）的接口，即可使用BT200。

■FEATURES（產品特點）
● Online monitoring and communication
The modulated communication signal does not interrupt
the 4 to 20 mA DC signals during communication.
● Common to all Yokogawa’s equipment
The Model BT200 BRAIN TERMINAL works with all
equipment that uses BRAIN communication.
● Easy of use
A large display （21 characters by 8 lines） eases setup and
alteration procedures in English prompting interactive
sequences.
● Diagnostics/security with error messages
• Self-check function
• Security code protection of setpoints
• Low battery voltage alarm
• Automatic power-off
● Printer （BT200-P00）
Printer prints out tag numbers and other parameters on the
spot.
● Intrinsic safety （Only for a without printer type）
CSA intrinsically safe approval.

Communication Line:
Line length: Up to 2 km （1.24 mile） （0.75 to 1.25 mm2
instrumentation cable）
Load resistance: 250 to 600 （including cable resistance）
Load capacitance: 0.22 F or less
Load inductance: 3.3 mH or less
Power line spacing: 15 cm （6 inch） or more （Avoid parallel
wiring.）
EMC Conformity Standards    ,
EN61326-1 Class A, Table2 （For use in industrial
locations）, EN61326-2-3
Display:
LCD dot matrix, 21 characters8 lines
Controls:
Membrane switches （four function keys, 20 general
operation keys, and one power switch）
Printer （BT200-P00）:
Thermal paper type
Power Supply:
Five AA 1.5 V dry alkali batteries （LR6/AM3 （N））
For Intrinsic safety type; Five
designated batteries （see OPTIONS）

Dimensions:
BT200-N00 . . . 228x110x51 mm
     （9.04.32.0 inch）
BT200-P00 . . . 321x110x61 mm
     （12.64.32.4 inch）
Approximate Weight:
BT200-N00 . . . 510 g （1.12 lb）
BT200-P00 . . . 700 g （1.54 lb）

產品選型：